Optimization of CNC Face Milling Process Parameters for WC With TiCN Coated Tool Life |
Author(s): |
| Bhavesh R dabhi , Atmiya Institute of Technology & Science; Keyur V Parmar, Atmiya Institute of Technology & Science |
Keywords: |
| Face Milling, Tool Life, MRR, Feed Rate, Depth Of Cut, Spindle Speed, Taguchi Method, Analysis Of Variance |
Abstract |
|
This thesis experimentally investigates the effect of output parameters for Tool Life and Material Removal Rate by varying machining parameters for Face Milling Tool. Design of experiment is created by Taguchi method using Minitab software. The signal-to-noise ratio is applied to find optimum process parameter for CNC Face milling. Experiment is carried out on OHNS AISI EO 300 by Face Milling Tool. Cutting Tool is Carbide tool with coating of TiCN with nose radius of 1.6 mm. A L 27 orthogonal array and analysis of variance are applied to study the performance characteristics of machining parameter (Spindle Speed, Depth of cut and Feed rate) with consideration of high MRR and maximum Tool Life have been identified. Result obtained by Taguchi Method and signal-to-noise ratio match closely by analysis of variance. Depth of cut is most effecting parameter for MRR and Tool Life. |
Other Details |
|
Paper ID: IJSRDV3I50002 Published in: Volume : 3, Issue : 5 Publication Date: 01/08/2015 Page(s): 57-64 |
Article Preview |
|
|
|
|
