A Survey on - Analysis of Cracked Structure with Finite Element Method (ANSYS 15.0)

The free vibration analysis of the cracked beam with many flexible cracks using using Finite Element Method (FEM) in the ANSYS 15.0. In this study, the matrix used for standard deviation. As most of the structures fail near the natural calamities. It is important to establish a mechanism for these structures to obtain the above claims using experimental and quantitative analysis to determine the natural quantity of hybrid composite plates. Test values established Modal Test using FFT Analyzer. The results were compared against the Package of Element (ANSYS 15.0). It has been observed that wind waves decrease with increasing cracking rates; an increase in the number of layers and values differing in the changing positions of the cracks. The reflection frequency is higher when the crack is in the center of the plate or when the angle of oriental is 90 degrees directly in the center of the plate.